Hydraulic presses for lamination of wooden stock

Type ROTOR

Designed for window profiled parts, supporting profiled parts, thicker boards, etc. The glued joints are dried naturally.

The feeding of the press is performed manually. The two movable bearings of the machine casing carry the four-side rotor, driven by toothed cam device with chain transmitance.

Pressing is carried out by hydraulic cylinders. Aligning is carried out by aligning units. Each aligning unit has 1 hydraulic cylinder. Aligning cylinders can be on the outer side of the rotor or in the interior of the rotor with counter stops on the outer side. Steering is done by manual hydraulic valves or electrical controls.



Gallery



Tehnical specifications

Operating length:
3000 – 6000 mm
Operating height:
1000 – 1200 mm
Operating thickness:
100 – 200 mm
Number of working sides:
4
Number of pressing cylinders:
6 – 12
Number of straightening cylinders:
3 – 12
Specific pressure:
6 – 11 kg/cm2
max. Working pressure:
160 bar
the rotor is driven with gear motor and chain

More info

If you want more information about our products please do not hesitate to contact us.

Enquiry